Reference Guide

RACADM Subcommand Details 37
IP Address 15 = ::
LOM Status:
NIC Selection = Dedicated
Link Detected = Yes
Speed = 10Mb/s
Duplex Mode = Half Duplex
NOTE: IPv6 information is displayed only if IPv6 is enabled in iDRAC6.
NOTE: LOM Status is displayed only for iDRAC6 on Rack and Tower servers and is
not displayed for iDRAC6 Enterprise on Blade servers.
getraclog
NOTE: To use this subcommand, you must have Login to iDRAC permission.
Synopsis
racadm getraclog -i
racadm getraclog [-A] [-o] [-c count] [-s start-
record] [--more]
Description
The getraclog -i command displays the number of entries in the iDRAC6 log.
Table 2-5 lists the options that allow the getraclog command to read entries.
Command Definition
getraclog -i Displays the number of entries in the iDRAC6 log.
getraclog Displays the iDRAC6 log entries.
Table 2-5. getraclog Subcommand Options
Option Description
-A Displays the output with no headers or labels.
-c Provides the maximum count of entries to be returned.