Reference Guide

30 RACADM Subcommand Details
If available, the coredump information is persistent across iDRAC6 power
cycles and remains available until either of the following conditions occur:
• The coredump information is cleared with the coredumpdelete
subcommand.
• Another critical condition occurs on the RAC. In this case, the coredump
information is relative to the last critical error that occurred.
See the coredumpdelete subcommand for more information about clearing
the coredump.
coredumpdelete
NOTE: To use this subcommand, you must have Clear Logs or Execute Debug
Commands permission.
Synopsis
racadm coredumpdelete
Description
The coredumpdelete subcommand can be used to clear any currently
resident coredump data stored in the RAC.
NOTE: If a coredumpdelete command is issued and a coredump is not
currently stored in the RAC, the command displays a success message.
This behavior is expected.
See the coredump subcommand for more information on viewing
a coredump.
Subcommand Definition
coredumpdelete Deletes the core dump stored in the iDRAC6.