Reference Guide

iDRAC6 Property Database Group and Object Definitions 157
cfgNetTuningNicFullDuplex (Read/Write)
cfgNetTuningNicMtu (Read/Write)
cfgSensorRedundancy
This group is used to set the power supply redundancy.
The following sections provides information about the objects in the
cfgSensorRedundancy group.
NOTE: The cfgSensorRedundancy object group is applicable only for iDRAC6 on
Rack and Tower Servers and not for iDRAC6 Enterprise on Blade Servers.
cfgSensorRedundancyIndex (Read Only)
Description Specifies the duplex setting for the RAC NIC. This property is not
used if the cfgNetTuningNicAutoNeg is set to 1 (enabled).
Legal Values 0 (Half Duplex)
1 (Full Duplex)
Default 1
Description The size in bytes of the maximum transmission unit used by the
iDRAC6 NIC.
Legal Values 576 – 1500
Default 1500
Description Index for the sensor redundancy group being read. Only power
supply redundancy is supported.
Legal Values 1
Default No default value