Reference Guide

156 iDRAC6 Property Database Group and Object Definitions
cfgNetTuning
This group enables users to configure the advanced network interface
parameters for the RAC NIC. When configured, the updated settings may
take up to a minute to become active.
The following sections provides information about the objects in the
cfgNetTuning group.
NOTE: The cfgNetTuning object group is applicable only for iDRAC6 on Rack and
Tower Servers and not for iDRAC6 Enterprise on Blade Servers.
CAUTION: Use extra precaution when modifying properties in this group.
Inappropriate modification of the properties in this group can result in your RAC
NIC become inoperable.
cfgNetTuningNicAutoneg (Read/Write)
cfgNetTuningNic100MB (Read/Write)
Description Enables autonegotiation of physical link speed and duplex. If
enabled, autonegotiation takes priority over values set in the
cfgNetTuningNic100MB and cfgNetTuningNicFullDuplex
objects.
Legal Values 1 (TRUE)
0 (FALSE)
Default 1
Description Specifies the speed to use for the RAC NIC. This property is not
used if the cfgNetTuningNicAutoNeg is set to 1 (enabled).
Legal Values 0 (10 MBit)
1 (100 MBit)
Default 1