Users Guide

68 Configuring the iDRAC6 Using the Web Interface
When a platform event occurs (for example, a battery warning assert),
a system event is generated and recorded in the System Event Log (SEL).
If this event matches a platform event filter (PEF) that is enabled and you
have configured the filter to generate an alert (PET or e-mail), then a PET or
e-mail alert is sent to one or more configured destinations.
If the same platform event filter is also configured to perform an action
(such as rebooting the system), the action is performed.
Configuring Platform Event Filters (PEF)
NOTE: Configure platform event filters before you configure the platform event
traps or e-mail alert settings.
1 Log in to the remote system using a supported Web browser.
See "Accessing the Web Interface."
2 Click System → Alert Management → Platform Events .
3 In the first table, select the Enable Platform Event Filter Alerts checkbox
and then click
Apply .
12 Processor Absent
13 Power Supply Warning Assert
14 Power Supply Critical Assert
15 Power Supply Absent
16 Event Log Critical Assert
17 Watchdog Critical Assert
18 System Power Warning Assert
19 System Power Critical Assert
20 Discrete SD Card Informational
Assert
21 Discrete SD Card Critical Assert
22 Discrete SD Card Warning Assert
Table 4-11. Platform Event Filters (continued)
Index Platform Event