Users Guide

iDRAC6 Property Database Group and Object Definitions 397
Description
Specifies the current mode of operation for the RAC network interface
controller (NIC). Table B-1 describes the supported modes.
cfgNicVLanEnable (Read/Write)
Legal Values
1 (TRUE)
0 (FALSE)
Default
0
Table B-1. cfgNicSelection Supported Modes
Mode Description
Shared Used if the host server integrated NIC is shared with the
RAC on the host server. This mode enables
configurations to use the same IP address on the host
server and the RAC for common accessibility on the
network.
Shared with Failover:
LOM 2
Enables teaming capabilities between host server LOM2
integrated network interface controllers.
Dedicated Specifies that the RAC NIC is used as the dedicated
NIC for remote accessibility.
Shared with Failover
All
LOMs
Enables teaming capabilities between all LOMs on the
host server integrated network interface controllers.
The remote access device network interface is fully
functional when the host operating system is configured
for NIC teaming. The remote access device receives data
through NIC 1 and NIC 2, but transmits data only
through NIC 1. Failover occurs from NIC 2 to NIC 3
and then to NIC 4. If NIC 4 fails, the remote access
device fails over all data transmission back to NIC 1, but
only if the original NIC 1 failure has been corrected.