Users Guide

384 RACADM Subcommand Overview
Table A-46 provides a list and associated commands for the cfgIpmiPet
group.
Input
Table A-47 describes the testtrap subcommand options.
Supported Interfaces
• Local RACADM
• Remote RACADM
• Telnet/ssh/serial RACADM
Table A-46. cfgEmailAlert Commands
Action Command
Enable the alert racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertEnable
-i 1 1
Set the destination
e-mail IP address
racadm config -g cfgIpmiPet -o
cfgIpmiPetAlertDestIpAddr -i 1
192.168.0.110
View the current test
trap settings
racadm getconfig -g cfgIpmiPet -i
<index>
where <index> is a number from 1 to 4
Table A-47. testtrap Subcommand Options
Option Description
-i Specifies the index of the trap configuration to use for the test Valid
values are from 1 to 4.