Users Guide

RACADM Subcommand Overview 377
The sslcertupload command returns 0 when successful and returns a nonzero
number when unsuccessful.
Restrictions
The sslcertupload subcommand can only be executed from a local or remote
RACADM client. The sslcsrgen subcommand cannot be used in the serial,
Telnet, or SSH interface.
Example
racadm sslcertupload -t 1 -f c:\cert\cert.txt
Supported Interfaces
•Local RACADM
• Remote RACADM
sslcertdownload
NOTE: To use this command, you must have Configure iDRAC permission.
Table A-36 describes the sslcertdownload subcommand.
Synopsis
racadm sslcertdownload -t < type > [-f < filename >]
-f Specifies the file name of the certificate to be uploaded. If the file is
not specified, the sslcert file in the current directory is selected.
Table A-36. sslcertdownload
Subcommand Description
sslcertupload Downloads an SSL certificate from the
iDRAC6 to the client’s file system.
Table A-35. sslcertupload Subcommand Options
Option Description