Users Guide

RACADM Subcommand Overview 367
Examples
racadm racreset
Start the iDRAC6 soft reset sequence.
racadm racreset hard
Start the iDRAC6 hard reset sequence.
Supported Interfaces
•Local RACADM
Remote RACADM
Telnet/ssh/serial RACADM
racresetcfg
NOTE: To use this command, you must have Configure iDRAC permission.
Table A-26 describes the racresetcfg subcommand.
Synopsis
racadm racresetcfg
Supported Interfaces
•Local RACADM
Remote RACADM
Telnet/ssh/serial RACADM
Table A-26. racresetcfg
Subcommand Definition
racresetcfg Resets the entire iDRAC6 configuration to factory
default values.