Users Guide

RACADM Subcommand Overview 363
Output
The setniccfg subcommand displays an appropriate error message if the
operation is not successful. If successful, a message is displayed.
Supported Interfaces
•Local RACADM
• Remote RACADM
• Telnet/ssh/serial RACADM
getniccfg
NOTE: To use the getniccfg command, you must have Login to iDRAC permission.
Table A-21 describes the setniccfg and getniccfg subcommands.
Synopsis
racadm getniccfg
Description
The getniccfg subcommand displays the current Ethernet management port
settings.
Sample Output
The getniccfg subcommand will display an appropriate error message if the
operation is not successful. Otherwise, on success, the output is displayed in
the following format:
NIC Enabled = 1
DHCP Enabled = 1
IP Address = 192.168.0.1
Subnet Mask = 255.255.255.0
Table A-21. setniccfg/getniccfg
Subcommand Definition
getniccfg Displays the current IP configuration for the controller.