Users Guide

354 RACADM Subcommand Overview
Examples
• racadm getssninfo
Table A-13 provides an example of output from the racadm getssninfo
command.
• racadm getssninfo -A
"root" "143.166.174.19" "Telnet" "NONE"
• racadm getssninfo -A -u *
"root" "143.166.174.19" "Telnet" "NONE"
"bob" "143.166.174.19" "GUI" "NONE"
getsysinfo
NOTE: To use this command, you must have Login to iDRAC permission.
Table A-14 describes the racadm getsysinfo subcommand.
Synopsis
racadm getsysinfo [-d] [-s] [-w] [-A] [-c] [-4] [-6]
[-r]
Table A-13. getssninfo Subcommand Output Example
User IP Address Type Consoles
root 192.168.0.10 Telnet Virtual KVM
Table A-14. getsysinfo
Command Definition
getsysinfo Displays iDRAC6 information, system
information, and watchdog status information.