Users Guide

352 RACADM Subcommand Overview
Examples
• racadm fwupdate -g -u - a 143.166.154.143 -d
<path>
In this example, the -g option tells the firmware to download the firmware
update file from a location (specified by the
-d option) on the TFTP server
at a specific IP address (specified by the
-a option). After the image file
is downloaded from the TFTP server, the update process begins.
When completed, the iDRAC6 is reset.
• racadm fwupdate -s
This option reads the current status of the firmware update.
NOTE: Remote RACADM firmware update through the local path is not supported
on Linux Operating Systems.
getssninfo
NOTE: To use this command, you must have Login to iDRAC permission.
Table A-11 describes the getssninfo subcommand.
Synopsis
racadm getssninfo [-A] [-u < username > | *]
Table A-11. getssninfo Subcommand
Subcommand Definition
getssninfo Retrieves session information for one or more
currently active or pending sessions from the
Session Manager's session table.