Users Guide

RACADM Subcommand Overview 349
coredumpdelete
NOTE: To use this command, you must have Clear Logs or Execute Debug
Commands permission.
Table A-8 describes the coredumpdelete subcommand.
Synopsis
racadm coredumpdelete
Description
The coredumpdelete subcommand can be used to clear any currently
resident coredump data stored in the RAC.
NOTE: If a coredumpdelete command is issued and a coredump is not
currently stored in the RAC, the command will display a success message.
This behavior is expected.
See the coredump subcommand for more information on viewing
a coredump.
Supported Interfaces
•Local RACADM
• Remote RACADM
• Telnet/ssh/serial RACADM
Table A-8. coredumpdelete
Subcommand Definition
coredumpdelete Deletes the core dump stored in the iDRAC6.