Users Guide

RACADM Subcommand Overview 341
RACADM Subcommand Overview
This section provides descriptions of the subcommands that are available in
the RACADM command line interface.
CAUTION: Racadm sets the value of objects without performing any functional
validation on them. For example, RACADM allows you to set the Certificate
Validation object to 1 with the Active Directory object set to 0, even though
Certificate Validation will happen only if Active Directory
®
is enabled. Similarly,
the cfgADSSOEnable object can be set to 0 or 1 even if the cfgADEnable object is
0, but it will take effect only if Active Directory is enabled.
help
NOTE: To use this command, you must have Login to iDRAC permission.
Table A-1 describes the help command.
Synopsis
racadm help
racadm help <
subcommand >
Description
The help subcommand lists all of the subcommands that are available when
using the racadm command along with a one-line description. You may also
type a subcommand after help to get the syntax for a specific subcommand.
Output
The racadm help command displays a complete list of subcommands.
The racadm help <subcommand> command displays information for the
specified subcommand only.
Table A-1. Help Command
Command Definition
help Lists all of the subcommands available to use
with RACADM and provides a short description for each.