Users Guide

Configuring Security Features 331
Using the Secure Shell (SSH)
For information about using SSH, see " Using the Secure Shell (SSH)."
Configuring Services
NOTE: To modify these settings, you must have Configure iDRAC permission.
Additionally, the remote RACADM command-line utility can only be enabled if the
user is logged in as root.
1 Expand the System tree and click Remote Access.
2
Click the Network/Security tab and then click Services .
3 Configure the following services as required:
• Local Configuration (Table 23-6)
• Web server (Table 23-7)
• SSH (Table 23-8)
• Telnet (Table 23-9)
• Remote RACADM (Table 23-10)
• SNMP agent (Table 23-11)
• Automated System Recovery Agent (Table 23-12)
Use the
Automated Systems Recovery Agent to enable the Last Crash
Screen
functionality of the iDRAC6.
NOTE: Server Administrator must be installed with its Auto Recovery feature
activated by setting the Action to either: Reboot System, Power Off System, or
Power Cycle System, for the Last Crash Screen to function in the iDRAC6.
4 Click Apply Changes .
Subject Information Certificate attributes entered by the subject
Issuer Information Certificate attributes returned by the issuer
Valid From Issue date of the certificate
Valid To Expiration date of the certificate
Table 23-5. Certificate Information (continued)
Field Description