Users Guide

Recovering and Troubleshooting the Managed System 307
DHCP Enabled Yes or No. Indicates if the Dynamic Host Configuration
Protocol (DHCP) is enabled.
Use DHCP to obtain
DNS server addresses
Yes or No. Indicates if you want to use DHCP to obtain DNS
server addresses.
Preferred DNS Server Indicates the static IPv4 address for the preferred DNS server.
Alternate DNS Server Indicates the static IPv4 address for the alternate DNS server.
Table 20-6. IPv6 Information Fields
Field Description
IPv6 Enabled Indicates whether IPv6 stack is enabled.
IP Address 1 Specifies the IPv6 address/prefix length for the iDRAC6 NIC.
The prefix length is combined with the IP Address 1. This is
an integer specifying the prefix length of the IPv6 address. It
can be a value between 1 and 128.
IP Gateway Specifies the gateway for the iDRAC6 NIC.
Link Local Address Specifies the iDRAC6 NIC IPv6 address.
IP Address 2...15 Specifies the additional IPv6 addresses for the iDRAC6 NIC,
if available.
Autoconfig Enabled Yes or No. AutoConfig lets the Server Administrator obtain
the IPv6 address for the iDRAC NIC from the Dynamic Host
Configuration Protocol (DHCPv6) server. Also, deactivates
and flushes out the Static IP Address, Prefix Length, and
Static Gateway values.
Use DHCPv6 to
obtain DNS server
Addresses
Yes or No. Indicates if you want to use DHCPv6 to obtain
DNS server addresses.
Preferred DNS Server Indicates the static IPv6 address for the preferred DNS server.
Alternate DNS Server Indicates the static IPv6 address for the alternate DNS server.
Table 20-5. IPv4 Information (continued)
Field Description