Users Guide

Using the iDRAC6 Configuration Utility 291
To view SEL messages, select View System Event Log and press <Enter>.
Use <Left Arrow> to move to the previous (older) message and
<Right Arrow> to move to the next (newer) message. Enter a record number
to jump to that record. Press <Esc> when you are through viewing SEL
messages.
To clear the SEL, select Clear the System Event Log and press <Enter>.
When you have finished with the SEL menu, press <Esc> to return to the
previous menu.
Exiting the iDRAC6 Configuration Utility
When you have finished making changes to the iDRAC6 configuration, press
the <Esc> key to display the Exit menu.
Select Save Changes and Exit and press <Enter> to retain your changes.
Select Discard Changes and Exit and press <Enter> to ignore any changes
you made.
Select Return to Setup and press <Enter> to return to the iDRAC6
Configuration Utility.