Users Guide

288 Using the iDRAC6 Configuration Utility
LAN User Configuration
The LAN user is the iDRAC6 administrator account, which is root by default.
Press <Enter> to display the LAN User Configuration submenu. When you
have finished configuring the LAN user, press <Esc> to return to the
previous menu.
Reset to Default
Use the Reset to Default menu item to reset all of the iDRAC6 configuration
items to the factory defaults. This may be required, for example, if you have
forgotten the administrative user password or if you want to reconfigure the
iDRAC6 from the default settings.
Press <Enter> to select the item. The following warning message is
displayed:
Resetting to factory defaults will restore remote Non-
Volatile user settings. Continue?
< NO (Cancel) >
< YES (Continue) >
Select YES and press <Enter> to reset the iDRAC6 to the defaults.
System Event Log Menu
The System Event Log Menu allows you to view System Event Log (SEL)
messages and to clear the log messages. Press <Enter> to display the System
Event Log Menu. The system counts the log entries and then displays the
total number of records and the most recent message. The SEL retains a
maximum of 512 messages.
LCD Remote KVM
Indication
Select Enabled to display the text KVM whenever a virtual
KVM is active on the unit.
LCD Front Panel
Access
Press <Right Arrow>, <Left Arrow >, and spacebar to switch
between the options: Disabled, View And Modify, and View
Only.
This setting defines the user access level for the LCD.