Users Guide

286 Using the iDRAC6 Configuration Utility
VFlash
Press <Enter> to select Disabled or Enabled.
Disable/Enable will cause a Detach and an Attach of all Virtual Media
devices from the USB bus.
Disable will cause the Virtual Flash to be removed and to become unavailable
for use.
NOTE: This field will be read-only if an SD card of a size larger than 256 MB is not
present on the iDRAC6 Express card slot.
Format VFlash
Choose this option to format the VFlash. Formatting will erase existing data
on the SD card. This field can be edited only if a SD card of size greater than
256 MB is present in the iDRAC6 Enterprise card slot.
Smart Card Logon
Press <Enter> to select Enabled or Disabled. This option configures the
Smart Card Logon feature. The available options are Enabled, Disabled, and
Enabled with RACADM.
NOTE: When you select Enabled or Enabled with RACADM, IPMI Over LAN will be
switched off and blocked for editing.
System Services Configuration
System Services
Press <Enter> to select Enabled or Disabled. See the Dell Lifecycle
Controller User Guide available on the Dell Support Website at
support.dell.com/manuals for more information.
NOTE: Modifying this option will restart the server when you Save and Exit to apply
the new settings.
Cancel System Services
Press <Enter> to select No or Yes.
When you select Yes, all Unified Server Configurator sessions are closed and
the server is restarted when you Save and Exit to apply the new settings.