Users Guide

Configuring the VFlash Media Card for Use With iDRAC6 267
Configuring the VFlash Media Card Using
RACADM
Enabling or Disabling the VFlash Media Card
Open a local console to the server, log in, and enter:
racadm cfgRacVirtual cfgVirMediaKeyEnable [ 1 or 0 ]
where 1 is enabled and 0 is disabled.
NOTE: For more information about cfgRacVirtual, including output details, see
"cfgRacVirtual."
NOTE: The RACADM command functions only if a VFlash media card is present.
If a card is not present, the following message is displayed: ERROR: Unable
to perform the requested operation. Make sure that a non–write protected SD Card
is inserted.
Resetting the VFlash Media Card
Open a Telnet/SSH text console to the server, log in, and enter:
racadm vmkey reset
CAUTION: Resetting the VFlash media card with the RACADM command resets
the size of the key to 256MB and deletes all existing data.
NOTE: For more information about vmkey, see "vmkey." The RACADM command
functions only if a VFlash media card is present. If a card is not present, the
following message is displayed: ERROR: Unable to perform the requested operation.
Make sure that a SD Card is inserted.