Users Guide

Configuring the VFlash Media Card for Use With iDRAC6 265
Initialize Click Initialize to create the VFlash image,
ManagedStore.IMG, on the SD card.
NOTE: The Initialize option is enabled only if a VFlash media card is
present. Also, the SD card can be formatted only if the VFlash
Attach option is unchecked.
NOTE: The ManagedStore.IMG and ManagedStore.ID files
displayed on the VFlash GUI page are not visible on the host
server's operating system but on the SD card.
CAUTION: While uploading a large image file, if you click
anywhere, refresh the page, or return to the VFlash page, a
message "
SD card unavailable, used by
another application
" may be displayed. Depending on
the partition or the selected image file size, this message may last
upto two hours.
Apply Saves the current configuration. If you change the virtual key
size using the drop-down menu, click Apply to create a new
virtual key with the specified size. All existing data will be erased.
This operation may take a few minutes to complete depending
on the size of the virtual key selected.
Table 16-1. SD Card Properties (continued)
Attribute Description