Users Guide

262 Configuring and Using Virtual Media
Why are all my USB devices
detached after I connect
a USB device?
Virtual Media devices and Virtual Flash devices are
connected as a composite USB device to the Host
USB BUS, and they share a common USB port.
Whenever any Virtual Media or Virtual Flash USB
device is connected to or disconnected from the
host USB BUS, all the Virtual Media and Virtual
Flash devices will be disconnected momentarily
from the host USB bus, and then they will be
connected again. If a Virtual Media device is being
used by the host operating system, you must avoid
attaching or detaching one or more Virtual Media
or Virtual Flash devices. It is recommended that
you connect all the required USB devices first
before using them.
What does the USB Reset
button do?
It resets the remote and local USB devices
connected to the server.
Table 15-4. Using Virtual Media: Frequently Asked Questions (continued)
Question Answer