Users Guide

196 Configuring Smart Card Authentication
• Ensure that iDRAC6 time and the domain controller time at the domain
controller server are set within 5 minutes of each other for Kerberos
authentication to work. See the
RAC Time on the System → Remote
Access
→ Properties → iDRAC Information page, and the domain controller
time by right clicking on the time in the bottom right hand corner of the
screen. The timezone offset is displayed in the pop up display. For US
Central Standard Time (CST), this is –6 ). Use the following RACADM
timezone offset command to synchronize the iDRAC6 time (through
Remote or Telnet/SSH RACADM):
racadm config -g
cfgRacTuning –o cfgRacTuneTimeZoneOffset <offset
value in minutes>.
For example, if the system time is GMT -6
(US CST) and time is 2PM, set the iDRAC6 time to GMT time of 18:00
which would require you to enter
" 360 " in the above command for the
offset. You can also use
cfgRacTuneDaylightoffset to allow for daylight
savings variation. This saves you from having to change the time on those
two occasions every year when the daylight savings adjustments are made,
or just allow for it in the above offset using
" 300 " in the above example.
Table 8-2. Distributed Versions of the C++ Redistributable Package
Redistributable
Package File Name
Version Release Date Size Description
vcredist_x86.exe 6.0.2900.2180 March 21, 2006 2.56 MB MS
Redistributable
2005
vcredist_x86.exe 9.0.21022.8 November 7, 2007 1.73 MB MS
Redistributable
2008