Users Guide

170 Using the iDRAC6 Directory Service
NOTE: The FQDN or IP address that you specify in this field should match the
Subject or Subject Alternative Name field of your domain controller certificate
if you have certificate validation enabled.
18 Click Next to go to the Step 3 of 4 Active Directory Configuration and
Management
page.
19 Under Schema Selection , select Standard Schema.
20 Click Next to go to the Step 4a of 4 Active Directory Configuration and
Management
page.
21 Select the Look Up Global Catalog Servers with DNS option and enter
the
Root Domain Name to use on a DNS lookup to obtain the Active
Directory Global Catalog Servers. Global Catalog Server Addresses 1-3 are
ignored. iDRAC6 attempts to connect to each of the addresses (first 4
addresses returned by the DNS lookup) one by one until it makes a
successful connection. A Global Catalog server is required only for
Standard Schema in the case that the user accounts and the role groups
are in different domains.
22 Select the Specify Global Catalog Server Addresses option and enter the
IP address or the Fully Qualified Domain Name (FQDN) of the Global
Catalog server(s). DNS lookup is not performed. At least one of the three
addresses must be configured. iDRAC6 attempts to connect to each of the
configured addresses one by one until it makes a successful connection.
Global Catalog server is required only for Standard Schema in the case
that the user accounts and the role groups are in different domains.
NOTE: The FQDN or IP address that you specify in the Global Catalog Server
Address field should match the Subject or Subject Alternative Name field of
your domain controller certificate if you have certificate validation enabled.
NOTE: The Global Catalog server is only required for standard schema in the
case that the user accounts and the role groups are in different domains.
And, in this multiple domain case, only the Universal Group can be used.
23 Under Role Groups , click a Role Group .
The
Step 4b of 4 Active Directory Configuration and Management page
is displayed.
24 Specify the Role Group Name .
The Role
Group Name identifies the role group in Active Directory
associated with the iDRAC.