Users Guide

Using the iDRAC6 Directory Service 165
racadm config -g cfgLanNetworking -o cfgDNSServer2
<secondary DNS IP address>
4 If you want to configure a list of user domains so that you only need to
enter the user name during login to the iDRAC6 Web-based interface,
type the following command:
racadm config -g cfgUserDomain -o
cfgUserDomainName -i <index>
You can configure up to 40 user domains with index numbers between
1 and 40.
See "Using Microsoft Active Directory to Log In to the iDRAC6" for
details about user domains.
5 Press Enter to complete the Active Directory configuration with
Extended Schema.