Users Guide

134 Adding and Configuring iDRAC6 Users
Table 6-4. IPMI User Privileges
Property Description
Maximum LAN User
Privilege Granted
Specifies the user’s maximum privilege on the
IPMI LAN channel to one of the following user groups:
Administrator, Operator, User, or None.
Maximum Serial Port
User Privilege Granted
Specifies the user’s maximum privilege on the
IPMI Serial channel to one of the following user groups:
Administrator, Operator, User, or None.
Enable Serial Over LAN Allows the user to use IPMI Serial Over LAN.
When checked, this privilege is enabled.
Table 6-5. iDRAC User Privileges
Property Description
Roles Specifies the user’s maximum iDRAC user privilege as
one of the following: Administrator, Operator, Read
Only, or None. See Table 6-6 for iDRAC Group
Permissions.
Login to iDRAC Enables the user to log in to the iDRAC.
Configure iDRAC Enables the user to configure the iDRAC.
Configure Users Enables the user to allow specific users to access
the system.
Clear Logs Enables the user to clear the iDRAC logs.
Execute Server Control
Commands
Enables the user to execute Server Control commands.
Access Console
Redirection
Enables the user to run Console Redirection.
Access Virtual Media Enables the user to run and use Virtual Media.
Test Alerts Enables the user to send test alerts (e-mail and PET) to a
specific user.
Execute Diagnostic
Commands
Enables the user to run diagnostic commands.