Users Guide

318 RACADM Subcommand Overview
fwupdate
NOTE: To use this command, you must have Configure iDRAC6 permission.
NOTE: Before you begin your firmware update, see "Advanced iDRAC6
Configuration" for additional information.
Table A-9 describes the fwupdate subcommand.
Synopsis
racadm fwupdate -s
racadm fwupdate -g -u -a <
TFTP_Server_IP_Address > [-d
<
path >]
racadm fwupdate -p -u -d <path>
racadm fwupdate -r
Description
The fwupdate subcommand allows users to update the firmware on the
iDRAC6. The user can:
• Check the firmware update process status
• Update the iDRAC6 firmware from a TFTP server by providing an IP
address and optional path
• Update the iDRAC6 firmware from the local file system using local
RACADM
• Rollback to the standby firmware
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table A-9. fwupdate
Subcommand Definition
fwupdate Updates the firmware on the iDRAC6