Users Guide

Monitoring and Alert Management 265

• Temperature Warning Assert Filter

• Temperature Critical Assert Filter

• Intrusion Critical Assert Filter

• Redundancy Degraded Filter

• Redundancy Lost Filter

• Processor Warning Assert Filter

• Processor Critical Assert Filter

• Processor Absent Filter

• Event Log Critical Assert Filter

• Watchdog Critical Assert Filter

• System Power Warning Assert Filter

• System Power Critical Assert Filter

When a platform event occurs (for example, a fan probe failure), a system

event is generated and recorded in the System Event Log (SEL). If this event

matches a platform event filter (PEF) in the Platform Event Filters list in the

Web-based interface and you have configured this filter to generate an alert

(PET or e-mail), then a PET or e-mail alert is sent to a set of one or more

configured destinations.

If the same platform event filter is also configured to perform an action

(such as rebooting the system), the action is performed.

Configuring Platform Event Filters (PEF)

Configure your platform event filters before you configure the platform event

traps or e-mail alert settings.

Configuring PEF Using the Web-Based Interface

For detailed information, see "Configuring Platform Event Filters (PEF)."

Configuring PEF Using the RACADM CLI

Enable PEF.

Open a command prompt, type the following command,

and press <Enter>: