Users Guide

Advanced iDRAC6 Configuration 107
Configuring the iDRAC6 Network Settings
CAUTION: Changing your iDRAC6 Network settings may disconnect your current
network connection.
Configure the iDRAC6 network settings using one of the following tools:
• Web-based Interface — See "Configuring the iDRAC6 NIC"
• RACADM CLI — See "cfgLanNetworking"
•
iDRAC6 Configuration Utility — See " Configuring Your System to Use
an iDRAC6"
NOTE: If you are deploying the iDRAC6 in a Linux environment, see "Installing
RACADM."
Accessing the iDRAC6 Through a Network
After you configure the iDRAC6, you can remotely access the managed
system using one of the following interfaces:
• Web-based interface
•RACADM
• Telnet Console
• SSH
•IPMI
Return to Serial Port
Configuration
Return to the Serial Port Configuration page.
Apply Changes Apply the terminal mode settings changes.
Table 5-12. Terminal Mode Settings Page Buttons (continued)
Button Description