Users Guide
Current IP Gateway = 192.168.0.1
Current IP Netmask = 255.255.255.0
DHCP Enabled = 0
Current DNS Server 1 = 0.0.0.0
Current DNS Server 2 = 0.0.0.0
DNS Servers from DHCP = 0
IPv6 settings:
Enabled = 0
Current IP Address 1 = 2002:0000:0000::0001
Current IP Gateway = ::
Prefix Length = 64
Autoconfig=1
DNSServerfromDHCPv6=0
CurrentDNSServer1=::
CurrentDNSServer2=::
System Information:
System Model = PowerEdge R610
System BIOS Version = 0.2.4
BMC Firmware Version = 0.32
Service Tag = AC056
Host Name =
OS Name =
Power Status = ON
Watchdog Information:
Recovery Action = None
Present countdown value = 15 seconds
Initial countdown value = 15 seconds
Watchdog Information:
RecoveryAction=None
Present countdown value = 15 seconds
Initial countdown value = 15 seconds
例
l racadm getsysinfo -A -s
"System Information:" "PowerEdge 2900" "A08" "1.0" "EF23VQ-0023" "Hostname"
"Microsoft Windows 2000 version 5.0, Build Number 2195, Service Pack 2" "ON"
l racadm getsysinfo -w -s
System Information:
SystemModel=PowerEdge2900
SystemBIOSVersion=0.2.3
BMCFirmwareVersion=0.17
ServiceTag=48192
HostName=racdev103
OSName=MicrosoftWindowsServer2003
PowerStatus=OFF
Watchdog Information:
RecoveryAction=None
Presentcountdownvalue=0seconds
Initialcountdownvalue=0seconds
制限
Dell™OpenManage™システムが管理下システムにインストールされているときにのみ、getsysinfo の出力のホスト名と OS 名フィールドに正確な情報が表示されます。管理下システムに
OpenManage がインストールされていないと、これらのフィールドには空白または不正確な値が表示されます。
getractime
表A-16 に、getractime サブコマンドについて説明します。
表 A-16getractime
メモ: このコマンドを使うには、iDRAC へのログイン 権限が必要です。
サブコマンド
定義
getractime
リモートアクセスコントローラから現在の時刻を表示します。