Users Guide

Configuring the iDRAC6 Using the Web Interface 75
Table 4-20. Web Server Settings
Setting Description
Enabled Enables or disables the iDRAC6 Web server. When
checked, the checkbox indicates that the Web server is
enabled. The default is enabled.
Max Sessions The maximum number of simultaneous sessions allowed
for this system. This field is not editable. The maximum
number of simultaneous sessions is five.
Active Sessions The number of current sessions on the system, less than or
equal to the value for Max Sessions. This field is not editable.
Timeout The time, in seconds, that a connection is allowed to
remain idle. The session is cancelled when the timeout is
reached. Changes to the timeout setting take affect
immediately and terminate the current Web interface
session. The web server will also be reset. Please wait for a
few minutes before opening a new Web interface session.
The timeout range is 60 to 10800 seconds. The default is
1800 seconds.
HTTP Port Number The port on which the iDRAC6 listens for a browser
connection. The default is 80.
HTTPS Port Number The port on which the iDRAC6 listens for a secure browser
connection. The default is 443.
Table 4-21. SSH Settings
Setting Description
Enabled Enables or disable SSH. When checked, the checkbox
indicates that SSH is enabled.
Timeout The secure shell idle timeout, in seconds. The Timeout
range is 60 to 1920 seconds. Enter 0 seconds to disable the
Timeout feature. The default is 300.
Port Number The port on which the iDRAC6 listens for an
SSH connection. The default is 22.