Users Guide

74 Configuring the iDRAC6 Using the Web Interface
Configuring iDRAC6 Services
NOTE: To modify these settings, you must have Configure iDRAC permission.
1 Click Remote Access → Configuration . Then, click the Services tab to
display the
Services configuration page.
2 Configure the following services, as required:
• Local Configuration — see Table 4-19
• Web server — see Table 4-20 for Web server settings
• SSH — see Table 4-21 for SSH settings
• Telnet — see Table 4-22 for Telnet settings.
• Remote RACADM — see Table 4-23 for Remote RACADM settings.
• SNMP Agent — see Table for SNMP settings.
• Automated System Recovery (ASR) Agent — see Table 4-25 for ASR
Agent settings.
3 Click Apply .
4 Click the appropriate button to continue. See Table 4-26.
Table 4-19. Local Configuration
Setting Description
Disable iDRAC Local
Configuration using
option ROM
Disables local configuration of iDRAC using option ROM.
Option ROM resides in the BIOS and provides a user
interface engine that allows BMC and iDRAC
configuration. The option ROM prompts you to enter the
setup module by pressing <Ctrl+E>.
Disable iDRAC Local
Configuration using
RACADM
Disables local configuration of iDRAC using local
RACADM.