Users Guide

56 Configuring the iDRAC6 Using the Web Interface
Link Local Address Specifies the IPv6 address for the iDRAC NIC.
IP Address 2 Specifies the additional IPv6 address for the iDRAC NIC if one
is available.
Use DHCP to
obtain DNS server
addresses
Enable DHCP to obtain DNS server addresses by selecting the
Use DHCP to obtain DNS server addresses checkbox.
When not using DHCP to obtain the DNS server addresses,
provide the IP addresses in the Preferred DNS Server and
Alternate DNS Server fields.
The default is Off. Check review copy
NOTE: When the Use DHCP to obtain DNS server addresses
checkbox is selected, IP addresses cannot be entered into the
Preferred DNS Server and Alternate DNS Server fields.
Preferred DNS
Server
Configures the static IPv6 address for the preferred DNS server.
To change this setting, you must first uncheck Use DHCP to
obtain DNS Server Addresses.
Alternate DNS
Server
Configures the static IPv6 address for the alternate DNS server.
To change this setting, you must first uncheck Use DHCP to
obtain DNS Server Addresses.
Table 4-5. IPMI Settings
Setting Description
Enable IPMI Over
LAN
When checked, indicates that the IPMI LAN channel is
enabled. The default is Off.
Channel Privilege
Level Limit
Configures the minimum privilege level, for the user, that can
be accepted on the LAN channel. Select one of the following
options: Administrator, Operator, or User. The default is
Administrator.
Encryption Key Configures the encryption key: 0 to 20 hexadecimal characters
(with no blanks allowed). The default is blank.
Table 4-4. IPv6 Settings (continued)
Setting Description (continued)