Users Guide

40 Basic Installation of the iDRAC6
Installing Your iDRAC6 Software
To install your iDRAC6 software:
1
Install the software on the managed system. See "Installing the Software
on the Managed System."
2 Install the software on the management station. See "Installing the
Software on the Managed System."
Configuring Your iDRAC6
To configure your iDRAC6:
1
Use one of the following configuration tools:
• Web-based interface (see "Configuring the iDRAC6 Using the Web
Interface")
• RACADM CLI (see "Using the iDRAC6 SM-CLP Command Line
Interface")
• Telnet console (see "Using a Telnet Console")
NOTE: Using more than one iDRAC6 configuration tool at the same time may
generate unexpected results.
2 Configure the iDRAC6 network settings. See "Configuring the iDRAC6
Network Settings."
3 Add and configure iDRAC6 users. See "Adding and Configuring iDRAC6
Users."
4 Configure the Web browser to access the Web-based interface. See
"Configuring a Supported Web Browser."
5 Disable the Microsoft
®
Windows
®
Automatic Reboot Option. See
"Disabling the Windows Automatic Reboot Option."
6 Update the iDRAC6 Firmware. See "Updating the iDRAC6 Firmware."