Users Guide

RACADM Subcommand Overview 339
vmkey
NOTE: To use this command, you must have Access Virtual Media permission.
Table A-49 describes the vmkey subcommand.
Synopsis
racadm vmkey <action>
If <action> is configured as reset, the Virtual Flash memory is reset to
the default size of 256 MB.
Description
When a custom virtual media key image is uploaded to the RAC, the key size
becomes the image size. The vmkey subcommand can be used to reset the
key back to its original default size, which is 256MB on the iDRAC6.
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
usercertupload
NOTE: To use this command, you must have Configure iDRAC permission.
Table A-50 describes the usercertupload subcommand.
Table A-49. vmkey
Subcommand Description
vmkey Performs virtual media key-related operations.
Table A-50. usercertupload
Subcommand Description
usercertupload Uploads a user certificate or a user CA
certificate from the client to the iDRAC6.