Users Guide

338 RACADM Subcommand Overview
vmdisconnect
NOTE: To use this command, you must have Access Virtual Media permission.
Table A-48 describes the vmdisconnect subcommand.
Synopsis
racadm vmdisconnect
Description
The vmdisconnect subcommand allows a user to disconnect another user's
virtual media session. Once disconnected, the Web-based interface will
reflect the correct connection status. This is available only through the use of
local or remote RACADM.
The vmdisconnect subcommand enables a iDRAC6 user to disconnect all
active virtual media sessions. The active virtual media sessions can be
displayed in the iDRAC6 Web-based interface or by using the RACADM
getsysinfo subcommand.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table A-48. vmdisconnect
Subcommand Description
vmdisconnect Closes all open iDRAC6 virtual media connections from remote
clients.