Users Guide

336 RACADM Subcommand Overview
Options
Table A-44 describes the testemail subcommand options.
Output
None.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
testtrap
NOTE: To use this command, you must have Test Alerts permission.
Table A-45 describes the testtrap subcommand.
Synopsis
racadm testtrap -i < index >
Description
The testtrap subcommand tests the RAC’s SNMP trap alerting feature by
sending a test trap from the iDRAC6 to a specified destination trap listener
on the network.
Before you execute the testtrap subcommand, ensure that the specified index
in the RACADM cfgIpmiPet group is configured properly.
Table A-44. testemail Subcommands
Option Description
-i Specifies the index of the e-mail alert to test.
Table A-45. testtrap
Subcommand Description
testtrap Tests the RAC’s SNMP trap alerting feature.