Users Guide

320 RACADM Subcommand Overview
Examples
• racadm racreset
Start the iDRAC6 soft reset sequence.
• racadm racreset hard
Start the iDRAC6 hard reset sequence.
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
racresetcfg
NOTE: To use this command, you must have Configure iDRAC permission.
Table A-26 describes the racresetcfg subcommand.
Synopsis
racadm racresetcfg
Supported Interfaces
• Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Table A-26. racresetcfg
Subcommand Definition
racresetcfg Resets the entire iDRAC6 configuration to factory
default values.