Users Guide

306 RACADM Subcommand Overview

Examples

• racadm fwupdate -g -u - a 143.166.154.143 -d

<path>

In this example, the

-g

option tells the firmware to download the firmware

update file from a location (specified by the

-d

option) on the TFTP server

at a specific IP address (specified by the

-a

option). After the image file

is downloaded from the TFTP server, the update process begins.

When completed, the iDRAC6 is reset.

• racadm fwupdate -s

This option reads the current status of the firmware update.

• racadm fwupdate -p -u -d <

path

In this example, the firmware image for the update is provided by the

host’s file system.

NOTE: The -p option is not supported in the Remote RACADM interface for the

fwupdate subcommand.

getssninfo

NOTE: To use this command, you must have Login to iDRAC permission.

Table A-11 describes the getssninfo subcommand.

Synopsis

racadm getssninfo [-A] [-u <

username

> | *]

Table A-11. getssninfo Subcommand

Subcommand Definition

getssninfo Retrieves session information for one or more

currently active or pending sessions from the

Session Manager's session table.