Users Guide

RACADM Subcommand Overview 297
Synopsis
racadm clearasrscreen
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
config
NOTE: To use the getconfig command, you must have Log In iDRAC permission.
Table A-4 describes the config and getconfig subcommands.
Synopsis
racadm config [-c|-p] -f < filename >
racadm config -g <
groupName > -o < objectName > [-i
<
index >] < Value >
Supported Interfaces
•Local RACADM
• Remote RACADM
• telnet/ssh/serial RACADM
Description
The config subcommand allows the user to set iDRAC6 configuration
parameters individually or to batch them as part of a configuration file. If the
data is different, that iDRAC6 object is written with the new value.
Table A-4. config/getconfig
Subcommand Definition
config Configures the iDRAC6.
getconfig Gets the iDRAC6 configuration data.