Users Guide

262 Sensors
Power Supplies Probes
The power supplies probes provides information on:
• Status of the power supplies
• Power supply redundancy, that is, the ability of the redundant power supply
to replace the primary power supply if the primary power supply fails.
NOTE: If there is only one power supply in the system, the Power Supply
Redundancy will be set to Disabled.
Power Monitoring Probes
Power monitoring provides information about the real time consumption of
power, in watts and amperes.
You can also view a graphical representation of the consumption of power for
the last one hour, day, or week from the current time set in the iDRAC6.
Temperature Probe
The temperature sensor provides information about the system board
ambient temperature. The temperature probe indicates whether the status of
the probe is within the pre-set warning and critical threshold value.
Voltage Probes
The following are typical voltage probes. Your system may have these and/or
others present.
• CPU [n] VCORE
• System Board 0.9V PG
• System Board 1.5V ESB2 PG
• System Board 1.5V PG
• System Board 1.8V PG
• System Board 3.3V PG