Users Guide

Using the iDRAC Configuration Utility 233
Table 15-2. LCD User Configuration
LAN User Configuration
The LAN user is the iDRAC administrator account, which is root by default.
Press <Enter> to display the LAN User Configuration submenu. When you
have finished configuring the LAN user, press <Esc> to return to the
previous menu.
LCD Line 1 Press <Right Arrow>, <Left Arrow >, and spacebar to switch
between the options.
This feature sets the Home display on the LCD to one of the
following options:
Ambient Temp, Asset Tag, Host Name, iDRAC6 IPv4
Address, iDRAC6 IPv6 Address, iDRAC6 MAC Address,
Model Number, None, Service Tag, System Power,
User-Defined String.
LCD User-Defined
String
If LCD Line 1 is set to User-Defined String, view or enter the
string to be displayed on the LCD.
The string can be maximum of 62 characters long.
LCD System Power
Units
If LCD Line 1 is set to System Power, select Watt or BTU/hr
to specify the Unit to be displayed on the LCD.
LCD Ambient Temp
Units
If LCD Line 1 is set to Ambient Temp, select Celsius or
Fahrenheit to specify the Unit to be displayed on the LCD.
LCD Error Display Select Simple or SEL (System Event Log).
This feature allows error messages to be displayed on the LCD
in one of two formats:
The Simple format provides an English language description
of the event.
The SEL format displays a System Event Log text string
LCD Remote KVM
Indication
Select Enabled to display the text KVM whenever a virtual
KVM is active on the unit.
LCD Front Panel
Access
Press <Right Arrow>, <Left Arrow >, and spacebar to switch
between the options: Disabled, View/Modify, and View Only.
This setting defines the user access level for the LCD.