Users Guide

196 Configuring and Using Virtual Media
Why are all my USB devices
detached after I connect
a USB device?
Virtual Media devices and Virtual Flash devices
are connected as a composite USB device to the
Host USB BUS, and they share a common USB
port. Whenever any Virtual Media or Virtual Flash
USB device is connected to or disconnected from
the host USB BUS, all the Virtual Media and
Virtual Flash devices will be disconnected
momentarily from the host USB bus, and then
they will be connected again. If a Virtual Media
device is being used by the host operating system,
you must avoid attaching or detaching one or
more Virtual Media or Virtual Flash devices. It is
recommended that you connect all the required
USB devices first before using them.
What does the USB reset
button do?
It resets the remote and local USB devices
connected to the server.
Table 10-4. Using Virtual Media: Frequently Asked Questions (continued)
Question Answer