Users Guide

Using the iDRAC6 With Microsoft Active Directory 155
NOTE: At least one of the 3 addresses is required to be configured. iDRAC6
attempts to connect to each of the configured addresses one-by-one until a
successful connection is made. With Standard Schema, these are the
addresses of the domain controllers where the user accounts and the role
groups are located.
racadm config -g cfgActiveDirectory -o cfgGlobal
Catalog1 <fully qualified domain name or IP
address of the domain controller>
racadm config -g cfgActiveDirectory -o cfgGlobal
Catalog2 <fully qualified domain name or IP
address of the domain controller>
racadm config -g cfgActiveDirectory -o cfgGlobal
Catalog3 <fully qualified domain name or IP
address of the domain controller>
NOTE: The Global Catalog server is only required for standard schema in the
case that the user accounts and the role groups are in different domains. And,
in this multiple domain case, only the Universal Group can be used.
NOTE: The FQDN or IP address that you specify in this field should match the
Subject or Subject Alternative Name field of your domain controller certificate
if you have certificate validation enabled.
If you want to disable the certificate validation during SSL handshake,
type the following
RACADM command:
racadm config -g cfgActiveDirectory -o
cfgADCertValidationEnable 0
In this case, no Certificate Authority (CA) certificate needs to be
uploaded.
If you want to enforce the certificate validation during SSL handshake,
type the following
RACADM command:
racadm config -g cfgActiveDirectory -o
cfgADCertValidationEnable 1
In this case, you must also upload the CA certificate using the following
RACADM command:
racadm sslcertupload -t 0x2 -f < ADS root CA
certificate
>