Users Guide

148 Using the iDRAC6 With Microsoft Active Directory
2 If DHCP is enabled on the iDRAC and you want to use the DNS provided
by the DHCP server, type the following
RACADM command:
racadm config -g cfgLanNetworking -o
cfgDNSServersFromDHCP 1
3
If DHCP is disabled on the iDRAC or you want to manually input your
DNS IP address, type following
RACADM commands:
racadm config -g cfgLanNetworking -o
cfgDNSServersFromDHCP 0
racadm config -g cfgLanNetworking -o cfgDNSServer1
<primary DNS IP address>
racadm config -g cfgLanNetworking -o cfgDNSServer2
<secondary DNS IP address>
4 If you want to configure a list of user domains so that you only need to
enter the user name during login to the iDRAC6 Web-based interface,
type the following command:
racadm config -g cfgUserDomain -o
cfgUserDomainName -i <index>
You can configure up to 40 user domains with index numbers between
1 and 40.
See "Using Active Directory to Log In to the iDRAC6" for details about
user domains.
5 Press Enter to complete the Active Directory configuration with
Extended Schema.