Users Guide

124 Adding and Configuring iDRAC6 Users
Table 6-5. iDRAC User Privileges
Property Description
Roles Specifies the user’s maximum iDRAC user privilege as
one of the following: Administrator, Operator, Read
Only, or None. See Table 6-6 for iDRAC Group
Permissions.
Login to iDRAC Enables the user to log in to the iDRAC.
Configure iDRAC Enables the user to configure the iDRAC.
Configure Users Enables the user to allow specific users to access
the system.
Clear Logs Enables the user to clear the iDRAC logs.
Execute Server Control
Commands
Enables the user to execute Server Control commands.
Access Console
Redirection
Enables the user to run Console Redirection.
Access Virtual Media Enables the user to run and use Virtual Media.
Test Alerts Enables the user to send test alerts (e-mail and PET) to a
specific user.
Execute Diagnostic
Commands
Enables the user to run diagnostic commands.
Table 6-6. iDRAC Group Permissions
User Group Permissions Granted
Administrator Login to iDRAC, Configure iDRAC, Configure Users, Clear
Logs, Execute Server Control Commands, Access Console
Redirection, Access Virtual Media, Test Alerts, Execute
Diagnostic Commands
Operator Selects any combination of the following permissions: Login to
iDRAC, Configure iDRAC, Configure Users, Clear Logs, Execute
Server Action Commands, Access Console Redirection, Access
Virtual Media, Test Alerts, Execute Diagnostic Commands
Read Only Login to iDRAC
None No assigned permissions