Users Guide

Advanced Configuration of the iDRAC6 107
racadm config -g cfgRacTuning -o
cfgRacTuneRemoteRacadmEnable 1
To disable the remote capability, type:
racadm config -g cfgRacTuning -o
cfgRacTuneRemoteRacadmEnable 0
RACADM Subcommands
Table 5-15 provides a description of each RACADM subcommand that you can
run in RACADM. For a detailed listing of
RACADM subcommands, including
syntax and valid entries, see "RACADM Subcommand Overview."
When entering a RACADM subcommand, prefix the command with
racadm, for example:
racadm help
Table 5-15. RACADM Subcommands
Command Description
help Lists iDRAC6 subcommands.
help
<subcommand>
Lists usage statement for the specified subcommand.
arp Displays the contents of the ARP table. ARP table entries may
not be added or deleted.
clearasrscreen Clears the last ASR (crash) screen (last blue screen).
clrraclog Clears the iDRAC6 log. A single entry is made to indicate the
user and time that the log was cleared.
config Configures the iDRAC6.
getconfig Displays the current iDRAC6 configuration properties.
coredump Displays the last iDRAC6 coredump.
coredumpdelete Deletes the coredump stored in the iDRAC6.
fwupdate Executes or displays status on iDRAC6 firmware updates.
getssninfo Displays information about active sessions.
getsysinfo Displays general iDRAC6 and system information.
getractime Displays the iDRAC6 time.
ifconfig Displays the current iDRAC6 IP configuration.