Users Guide

102 Advanced Configuration of the iDRAC6
Configuring the iDRAC6 Network Settings
CAUTION: Changing your iDRAC6 Network settings may disconnect your current
network connection.
Configure the iDRAC6 network settings using one of the following tools:
• Web-based Interface — See "Configuring the iDRAC6 NIC"
• RACADM CLI — See "cfgLanNetworking"
•
iDRAC6 Configuration Utility — See " Configuring Your System to Use
an iDRAC6"
NOTE: If you are deploying the iDRAC6 in a Linux environment, see "Installing
RACADM."
Accessing the iDRAC6 Through a Network
After you configure the iDRAC6, you can remotely access the managed
system using one of the following interfaces:
• Web-based interface
•RACADM
• Telnet Console
• SSH
•IPMI
Table 5-12. Terminal Mode Settings Page Buttons
Button Description
Print Print the Terminal Mode Settings page.
Refresh Refresh the Terminal Mode Settings page.
Go Back to Serial Port
Configuration
Return to the Serial Port Configuration page.
Apply Changes Apply the terminal mode settings changes.