Release Notes

file:///T|/htdocs/SOFTWARE/smdrac3/idrac/idrac10mono/en/readme/readme.txt[10/26/2012 1:41:41 PM]
* Remote Racadm and VMCLI utilities is not supported with IPv6 in this
release.
* If iDRAC firmware update is interrupted for any reason, a wait of
up to 30 minutes may be required before another firmware update
operation is allowed again.
* The Diagnostic tab on the GUI page is not operational if iDRAC6 -
Enterprise card is not installed.
* Enabling Virtual Flash from iDRAC Configuration Utility will not
take effect if the SD card is not formatted.
######################################################################
KNOWN ISSUES FOR DOCUMENTATION
######################################################################
This section provides additional information about known issues with
the iDRAC6 Firmware version 1.0 User's Guide.
None
######################################################################
Information in this document is subject to change without notice.
(C) 2009 Dell Inc. All rights reserved.
Reproduction of these materials in any manner whatsoever without
the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: "Dell", "Dell OpenManage", "PowerEdge",
and "PowerVault" are trademarks of Dell Inc.; "Microsoft", "Windows",
"Windows Server", "Windows Vista", and "Active Directory" are
trademarks or registered trademarks of Microsoft Corporation;
SUSE" is a registered trademark of Novell, Inc.; "Red Hat" and
"Linux" are registered trademarks of Red Hat, Inc.; VMware is a
registered trademark of VMware, Inc. in the United States and/or other
jurisdictions.
Other trademarks and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products.
Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
March 2009