Release Notes

iDRAC6 v3.85.03 8
Resolution
Run the racadm racreset command to access the Virtual Console again.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 13
Description
On few Windows operating systems, under certain conditions, the iDRAC ivmcli.exe fails. This is due to run-time
components of Visual C++(R) Libraries (VC++ 2008 redistributable package) required to run applications that are
not available.
Resolution
Download and install Microsoft Visual C++ 2008 Redistributable Package (x86) from the following location:
//microsoft.com/downloads/details.aspx?familyid=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 14
Description
When using the Virtual Media with recent Windows releases on the management station, the CD/DVD redirection
may not work properly and may cause continuous USB bus resets if you have logged in using non-administrator
account.
Resolution
Set the Attach Virtual Media option to Detach to stop the USB bus resets and allow CD/DVD redirection to work
properly when you log in again with an Administrator's account.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 15
Description
When remote management is enabled, the WWN/MAC page may not immediately display the remotely enabled
MACs and instead may display N/A under the remotely assigned column. This may happen when you navigate to the
to the
WWN/MAC page for the first time.
Resolution
If this happens, navigate to a different page in the iDRAC6 web interface and then return to the WWN/MAC page
to see the remotely assigned MACs. Ensure the host system has booted before navigating to the
WWN/MAC page
when remote management is enabled.
Versions/Systems affected
All iDRAC6 supported PowerEdge systems.
Issue 16
Description
When you access the iDRAC web interface in IPv6 network with Mozilla Firefox 4.0 or later and accept the CSR
certificate, it displays an error message, "An error has occurred during a connection to <server certificate info>,
Peer certificate issuer has been marked as not trusted by the user. (Error code: sec_error_untrusted_issuer)."
Resolution
Create a certificate request and issue it to a trusted domain. Register it to a domain DNS server. Use a trusted
domain name, instead of the IPv6 address.